Back Flexography

Mizarflex

Download PDF
Ver fotos See images
Mizarflex
Gearless stack flexographic printing press with CI-comparable print quality, two-sided printing in a single pass and ultra-fast job changeovers. Custom-engineered, with direct contact with the design engineer.
  • Seguridad
    Safety Integrated incorporates safety technology into standard automation, ensuring reliable and efficient operation.
  • Direct Drive
    Direct Drive technology integrated in the main shafts of the printing press, achieving a more precise and energetic efficiency.
  • Wifi
    Printing press control by means of a wireless HMI.
  • Registro
    Electronic register system integrated in the machine control platform achieving an excellent precision on any support.
  • Cortometraje
    Machine specially designed for short runs.
  • En línea
    Possibility of installing the printing units in-line with other machines.

Data sheet

600 800 1000 1200 1400
Web width 650 mm 850 mm 1.050 mm 1.250 mm 1.450 mm
Printing width 620 mm 820 mm 1.020 mm 1.220 mm 1.420 mm
Printing repeat 260/600 mm 350 (400)/850 mm – 450/1.200 mm
Number of colours 4 – 6 – 8
Printing possibilities 4+0 / 3+1 / 2+2 – 6+0 / 5+1 / 4+2 / 3+3 – 8+0 / 7+1 / 6+2 / 5+3 / 4+4
Printing speed 450 m/min
Maximum reel diameter 800 – 1.000 – 1.200 mm
Additional equipment Longitudinal and transversal register system
Automatic pressure control
Automatic cleaning system
Web guide system
Web inspection system
Viscosity control system

Characteristics

The Mizarflex is our latest-generation gearless stack flexographic printing press. Designed for maximum profitability, it delivers CI-comparable print quality with far greater operating advantages, above all two-sided printing in a single pass and job changeovers in just a few seconds.

Since 1968, every Mizarflex is custom-engineered: you work directly with the engineer designing your press, with no intermediaries, to configure widths, number of colours, drying, inline modules and winding according to your actual production.

It uses Direct Drive technology on the plate and impression cylinders and Motion Control across the entire press.

Cantilever-mounted shafts for quick changeovers of plate and anilox sleeves, with pneumatic closures of automatic opening, without tools. No gear changes are required for printing repeat changeovers.
Exchange of sleeves or carriers is made inside the machine, without the need of dismounting the shaft.
Preparation of the available printing groups for the following job while the machine is in production mode, allowing to make a job change without stopping the machine.
Positioning and pressure adjustment of the impression roller, plate cylinder and anilox are done through servomotors. Automatic positioning adjustment according to printing job requirements.

Longitudinal register through servomotor of the plate cylinder, allowing infinite and unrestricted adjustment.

Inking system by closed chamber doctor blades, with pneumatic pressure regulation.

The control panel features an industrial PC with an integrated touchscreen display, allowing centralized control and bringing together all the necessary controls for operating the machine.

Drying system with two completely independent circuits. Module for drying between the printing units and a horizontal tunnel with high efficiency ensuring material drying before rewinding.

It can be equipped with fully automatic unwinders and rewinders, or with double stations for semi-automatic changeover. Diameter capacity up to 1,200 mm.

Equipment for solvent-based, water-based or UV-curable lacquering or coating can be incorporated to be registered with the printing.

Programa kit digital financiado por los fondos next generation del mecanismo de recuperación y resiliencia
kit digitalkit digital